GUITARLIFT Half Plate
Specifications
| Type | Guitar rest |
Available
Guitarlift offers each guitarist the ergonomically correct (sitting-) position.
Guitarlift also prevents the dampening of the ribs and back of the guitar, an aspect that is important for the sound development and projection of the instrument.
Millimeter accurate adaption possibilities, relaxed practicing without getting a backache, a completely free left hand, sound enhancement are the advantages of this completely new and innovative guitar support.
Guitarlift is made in Germany.
Guitarlift Half Plate
For players with large to medium stature, flat to moderately steep posture.
The Half Plate allows contact with the upper part of the guitar back, with the same leg cut and comfort as the Big Plate.
Details:
Color: Black or Transparent Crystal Clear
Made of Plexiglas ® GS (4 mm, max. external thread: 25 x 31 cm)
Large sponge rubber cushion (circular 25 mm, inner dimension 3 mm)
Leg cutout (20.5 cm)
4 transparent suction cups (diameter 50 mm) with release flap
Setting
The adjustment is very simple: First, find a suitable position for your Guitarlift at the bottom of your guitar. Then set the suction cups as close to the edge as possible. This increases the stability and allows more vibration of the back.
Suction cups stick only on smooth lacquered and dust-free surfaces.
On satin-varnished or damaged lacquers it will be necessary to use the original foil pads. To care rinse the cups with clear water and then wipe with a microfiber cloth.
To apply the foil pads please take a look to the photos.
Hint: You do not have to press hard to attach the suction cups, a gentle pressure would be enough.
Guitarlift also prevents the dampening of the ribs and back of the guitar, an aspect that is important for the sound development and projection of the instrument.
Millimeter accurate adaption possibilities, relaxed practicing without getting a backache, a completely free left hand, sound enhancement are the advantages of this completely new and innovative guitar support.
Guitarlift is made in Germany.
Guitarlift Half Plate
For players with large to medium stature, flat to moderately steep posture.
The Half Plate allows contact with the upper part of the guitar back, with the same leg cut and comfort as the Big Plate.
Details:
Color: Black or Transparent Crystal Clear
Made of Plexiglas ® GS (4 mm, max. external thread: 25 x 31 cm)
Large sponge rubber cushion (circular 25 mm, inner dimension 3 mm)
Leg cutout (20.5 cm)
4 transparent suction cups (diameter 50 mm) with release flap
Setting
The adjustment is very simple: First, find a suitable position for your Guitarlift at the bottom of your guitar. Then set the suction cups as close to the edge as possible. This increases the stability and allows more vibration of the back.
Suction cups stick only on smooth lacquered and dust-free surfaces.
On satin-varnished or damaged lacquers it will be necessary to use the original foil pads. To care rinse the cups with clear water and then wipe with a microfiber cloth.
To apply the foil pads please take a look to the photos.
Hint: You do not have to press hard to attach the suction cups, a gentle pressure would be enough.
